HOTREGA® epoxy resin remover， 1 litre tin can

Description

HOTREGA® Epoxy resin remover， 1 litre tin canProduct description:Highly effective special gel for the seamless removal of epoxy resin veils after grouting and leaked epoxy resin contamination indoors and outdoors. Excellent length strength for epoxy resin-based paving joint joints (2K grouts) and hard-core joints of synthetic resin or flex joints. Also ideally suited for the removal of resin residues， sealants， coatings， impregnations， oil and grease deposits， paints (graffiti)， adhesives， plastic residues and much more. The stable gel formula allows an optimal exposure time and problem-free application on vertical surfaces. Application:for: paving stones， concrete blocks， natural stones as well as all clinker and ceramic surfaces. Also ideal for removing sealants， impregnations， graffiti， paints， adhesives， resin， tar， oil and greaseProperties:Removes (2K) epoxy resin joints， epoxy resin curtains and residues of synthetic resin and flex joints Acid-free – can also be used on sensitive surfaces Ideal for paving stones， natural stones and tiles of all kindsInstructions for use:Always check material compatibility in an inconspicuous place before use. The processing or substrate temperature should be between +15 °C and +25 °C. Dried coarse residues must be mechanically removed in advance after heating. Apply the product unaltered to the dry layer to be removed (e.g. with the enclosed brush， roller or scrubber) and leave on for approx. 10–15 minutes. Then clean the surface with warm water and a pad that is as rough as possible (e.g. green pad) or a brush. In case of very stubborn (old) soiling， if necessary. extend the exposure time or repeat the operation. Do not allow the product to dry completely during the exposure phase. Cleaning should be carried out in sections as far as possible (maximum approx. 5 m² per operation). After the cleaning process， add plenty of clear water so that any epoxy resin residues do not deposit on the surface again. Yield: approx. 15–20 m² / litre - depending on dirt and suction capacity of the surfaceManufacturer Item number: H 110 250 001Package size: 1 litre tin canImportant information:Download "Safety Data Sheet" for this productLabelling in accordance with Regulation (EC) No. 1272/2008 [CLP/GHS]Signal word: HazardHazard statements: H225 - Liquid and steam easily disable. H319 - Causes severe eye irritation.Precaution: P101 - If medical advice is required， have packaging or label ready. P102- Must not enter the hands of children. P210— Keep away from heat， hot surfaces， sparks， open flames， and other sources of heat. No smoking. P280 - Wear protective gloves/protective clothing/eye protection/face protection. P305+P351+P338 - IN CASE OF EYE CONTACT: Gently sprinkle with water for a few minutes. Remove any contact lenses if possible. Expand further. P403+P235- Store in a well-ventilated place. Hold the cool. P501 - Content/Vehicle municipal pollutant collection point.Use by non-professional users permitted. This product information does not replace the observance of the instructions for use and does not claim to be complete. Use product carefully. Always read the label and product information before use. Observe warnings and symbols in the instructions for use.

• Brand: Hotrega
• Category: Varnishes & Finishes

• Fruugo ID: 43367086-88230325
• EAN: 4029559011820
• Sold by: Oleanderhof